Part of a complete system for simplifying and maintaining proper water chemistry in
very small (e.g. “nano”) reef aquaria.
NanoCode A provides calcium, potassium, and strontium in aragonite ratios, enhanced
magnesium (relative to the aragonite ratios), and non-conservative minor* and trace
elements in natural seawater ratios.
Used in conjunction with NanoCode B, promotes stable water chemistry and improves
rate of biogenic aragonite formation.
Contains no phosphate, silicate, or organic material.
For complete information, click the ‘Technical’ button at the top right.
The carbonate-bearing component of a two-part method for dosing calcium and
carbonates (the substances largely responsible for increasing alkalinity
(”buffering capacity”)) in the same ratio as that found in natural seawater.
Ionically-balanced with respect to natural seawater concentrations of calcium and
carbonates when used in equal amounts with Reef Cōde A.
Benefits reef-building organisms such as corals, clams, calcareous algae, etc.
Simplifies calcium and alkalinity maintenance.
Stronger than most competing products.
Contains no phosphate, silicate, or organic material.
Formulated by a marine scientist.
For complete information, click the ‘Technical’ button at the top right.
Next-generation regenerable phosphate adsorption resin effective in marine aquaria; will also remove silicates.
Far more effective than activated alumina and granular ferric products.
Will not negatively impact water quality nor release phosphate or silicate once exhausted;
will not break up or disintegrate like ferric medias, and contains no aluminum to dissolve in
aquaria and harm inhabitants.
Synthetic polymer resin beads provide for durability and excellent flow characteristics;
may be employed in fluiduzed-bed, canister, or passive filtration.
Regenerable up to five times, dramatically increasing cost effectiveness.
For complete information, click the ‘Technical’ button at the top right.
Alkalinity-increasing (”buffer”) powdered blend formulated specifically for maintaining
pH-stability in Rift Lake biotope aquaria and other systems housing fishes and plants
endemic to environments with an alkaline pH.
Not a re-packaged marine aquarium buffer.
Helps increase pH stability in an aquarium by raising the alkalinity; continued addition raises
pH to a range of 7.9 – 8.3.
Formulated by a marine scientist.
For complete information, click the ‘Technical’ button at the top right.
Advanced adsorbent of phosphate and silicate; provides rapid results.
May be used on an on-going basis as part of a sensible nutrient-control program.
Spherical shape and porosity maximize reactive surface area; promotes reactivity and
efficiency by maximizing contact time and minimizing tendency to pack and channel water,
and outperforms competing non-spherical phosphate-adsorbent media.
Recommended usage is 2 g of Extrax Phos per 1 US-gallon (3.8 L) in aquarium; 600 grams
will adsorb up to 20 mg/L phosphate in 300 US-gallons (1,136 L).
Does not release phosphate, silicate, or soluble compounds into aquarium system .
Safe for use in all freshwater and marine aquaria, including freshwater planted systems
and reef systems.
For complete information, click the ‘Technical’ button at the top right.